221 Commits (f2b45bbd40855deded9869145a2edd1bc7955d08)

Author	SHA1	Message	Date
Sarah French	559233329e	Fix: Re-enable using prerelease providers in the new two-step provider download in `init` (#38502) ... * test: Add pre-release to available providers. Existing tests don't use it because the configuration doesn't specify the prerelease as the version constraint. This was the gap in my understanding - prerelease providers are handled differently in the installer logic. I believe it boils down to this: 29863fd2ba/versions/set_released.go (L5-L7) * test: Add failing tests that show expected behaviour when a pre-release of a provider is used * fix: Ensure that any relevant version constraints from the config are available to use when installing providers present in the state * test: Add test defining pre-release download behaviour that was present before v1.15 * test: Update test to reflect that 2 step init is no longer experimental or specific to the PSS project	2 months ago
Austin Valle	1c88535ac0	add test for validation reference to non-const variable	2 months ago
Austin Valle	d2c9214081	prune validate nodes	2 months ago
Austin Valle	b8bdde09ca	Merge branch 'main' into provider-defined-function-during-init	2 months ago
Sarah French	b7a43b31b0	Comments and changes from pairing ... Co-authored-by: Austin Valle <austinvalle@gmail.com>	2 months ago
Radek Simko	e6850a514f	fix: Avoid warnings in `terraform output -raw` (#38487) ... * command/output: Avoid warnings in '-raw' output * command/output: Add regression test Co-authored-by: Daniel Schmidt <danielmschmidt92@gmail.com> * Add changelog entry * Clarify changelog entry --------- Co-authored-by: Daniel Schmidt <danielmschmidt92@gmail.com>	2 months ago
Austin Valle	6c783ce1be	add some tests + TODOs	2 months ago
Sarah French	bb7491c368	Limit backend block validation in the `validate` command to just backend type (#38468) ... * fix: Limit backend validation to just the backend type. Also, remove similar validation for state stores, which would cause a similar issue in future. * test: Add a new test showing behavior when removed backend types are in a config.	2 months ago
Sarah French	c05eaaf20d	PSS: Refactor how we handle unmanaged providers, add support for using dev_override (#38269) ... * feat: Enable use of developer override providers when using PSS * feat: Store how a provider was supplied to Terraform in the backend state file. This allows triggering a prompt for state migration if there's a change between using a managed provider versus an unmanaged/override provider. * test: Update all PSS-related backend state files in test fixtures to include new, necessary provider_supply_mode data. * fix: Avoid duplicate dev_override warnings * refactor: Change how we determine how a provider is supplied to Terraform. By using supply mode data we prevent multiple parts of the code checking if a given provider is reattached/builtin/etc... * test: Add separate tests showing a built-in or dev override provider being used for the main workflow using PSS * test: Add E2E tests that characterise current behaviour when how a provider is supplied is changed partway through different workflows * fix: Tolerate missing default workspace when using PSS and init handles minor changes in state store configuration. * feat: `init`-related code will prompt a user to migrate state if Terraform detects a swap between managed and unmanaged providers being used for PSS. Internally, what happens is the different version data (null versus a value being present) impacts the hash of the state store. This then triggers logic where TF checks if a migration is needed or if the new hash value should be silently updated in the backend state file. We always prompt for migration. * refactor: Add `NotManagedByTerraform` method to `ProviderSupplyMode` * Apply suggestions from code review Co-authored-by: Radek Simko <radeksimko@users.noreply.github.com> --------- Co-authored-by: Radek Simko <radeksimko@users.noreply.github.com>	2 months ago
Daniel Banck	cb72a8e1d2	command: test `providers schema` with const variables	3 months ago
Daniel Banck	d1f04677c1	command: test `modules` with const variables	3 months ago
Daniel Banck	ec70386d30	command: test `state push` with const variables	3 months ago
Daniel Banck	77492116dd	command: test `taint` with const variables	3 months ago
Daniel Banck	27b6f5ed29	command: test `get` with const variables	3 months ago
Daniel Schmidt	e4f91190c9	add tests for dynamic module sources in terraform test	3 months ago
Daniel Banck	45ba6796ba	Add more dynamic module sources tests	4 months ago
Daniel Banck	b6804e2edd	Use configuration values for jsonconfig ... Instead of outputting the raw values from the ModuleCall, we're now using the evaluated values from the Config. This should keep the JSON output unchanged, we just need to make sure to persist the values in `Config` when loading the configuration.	4 months ago
Daniel Banck	5a70c424b3	Fix import and show command ... This commit moves some code around to fix configuration loading during the (legacy) import command. And add vars to the show command.	4 months ago
Daniel Banck	0043e1ce24	Update module call configuration storage ... This turns the string representation of the source and version attribute of a module call into an expression. This leads to a change in the JSON output: `"source": "./foo"` --> `"source": {"constant_value": "./foo"},`	4 months ago
Daniel Banck	4ef9684188	Rework most of the configuration loading ... We previously used a loader -> BuildConfig flow to load configuration. This commit changes most (but not all yet) flows to use the new graph-based approach. Instead of simply recursively loading the modules, we now need to take a stepped approach: 1. Load the root module 2. Collect the variables and their values 3. Build the configuration with the graph-based approach Because this approach relies on different parts from different packages, it can't easliy be done within the `configload` package. So, now we do most of in the backend or command.	4 months ago
Radek Simko	07b3e3b800	command/init: Merge duplicated PSS logic back into existing codepath (#38227)	4 months ago
Sebastian Rivera	305dba5dcc	feat: denote sensitive attribute paths in query start msg ... This new field will be consumed in order to redact sensitive values referenced in a list block's input configuration from the query logs. We simply pipe the config schema and the marked values, and include the paths in the query_start log output.	4 months ago
Sarah French	c7da02b4a8	feat: Enable validate command to validate state_store blocks. (#38157)	4 months ago
Sarah French	694f746748	validate: Add checking the backend block to the `validate` command (#38021) ... * feat: Make validate command detect when an unknown backend type is in use. * feat: Make validate command detect when the backend configuration doesn't match the schema. * fix: Stop suppressing the Required:true parts of the backend schema when validating backend blocks * test: Add test showing validation fails when a required attribute is missing from a backend's config	4 months ago
Samsondeen	77237310aa	Colorize diag details (#38145)	4 months ago
Samsondeen	0b35407d2c	Allow functions in test mock blocks (#37883)	5 months ago
Sarah French	fa620ad0e9	test: Add and update some `init` command tests, linting and code comment changes (#38056)	5 months ago
Sarah French	f88d09544e	PSS: Add tests showing `provider` commands being used with PSS (#37959) ... * test: Add E2E test for using pluggable state storage with the `providers` command Note: I've excluded the `terraform providers locks` and `terraform providers mirror` commands as they don't interact with backends. * test: Add integration test for using pluggable state storage with the `providers` command * refactor: Change ioutil.ReadDir to os.ReadDir * test: Add integration test for using pluggable state storage with the `providers schema` command * feat: Allow state store schema's to be included when schemas are marshalled into JSON output * test: Assert that state stores are present in provider schemas returned from `providers schema`. * test: Update existing tests to accommodate state stores being in provider schema output * test: Update E2E test for `providers` commands to be better scoped to testing use of a state store to access and use state when generating output. This complements TestProvidersSchema that tests that state stores in a provider are reflected in the JSON representations of the schemas that the command returns. * chore: Replace `io/ioutil` with `io` in `providers schema` tests	6 months ago
Sarah French	940fbfb7ed	test: Add more test coverage of `validate` command's interaction with `backend` blocks (#37977) ... * test: Show how the validate command doesn't detect when an unknown backend type is in the config. * test: Minor fixes to error messages when test fails * test: Add some TODOs in code comments These tests are here to define existing behaviour, not define desired behaviour. I wanted to make that clear!	6 months ago
Radek Simko	213d133d86	command/meta: Enable migration from PSS to a backend (#37949) ... * command/meta: Enable migration from PSS to a backend * Address PR feedback * Update internal/command/meta_backend.go Co-authored-by: Sarah French <15078782+SarahFrench@users.noreply.github.com> * meta_backend: Rename stateStore_c_S to stateStore_to_backend --------- Co-authored-by: Sarah French <15078782+SarahFrench@users.noreply.github.com>	6 months ago
Sarah French	f591872699	PSS: Allow pluggable state store configuration to be stored in a plan file (#37956) ... * refactor: Rename Meta's backendState field to backendConfigState This helps with navigating ambiguity around the word backend. The new name should indicate that the value represents a `backend` block, not a more general interpretation of what a backend is. * fix: Only set backendConfigState to synthetic object if it's nil due to a lack of data. Don't change it if pluggable state storage is in use. * feat: Enable recording a state store's details in an Operation, and using that data when creating a plan file. * fix: Include provider config when writing a plan file using pluggable state storage * fix: Having `backendConfigState` be nil may be valid, but it definitely isn't valid for `stateStoreConfigState` to be nil When backendConfigState is nil it means that an implied local backend is in use, i.e. there is no backend block in the config. * test: Add integration test showing that a plan command creates a plan file with the expected state_store configuration data * refactor: Apply suggestion from @radeksimko Co-authored-by: Radek Simko <radeksimko@users.noreply.github.com> * fix: Allow panics to occur if an unexpected implementation of `backend.Backend` is encountered when managing a state store * docs: Add code comment explaining the current situation with passing backend config state to downstream logic. In future this should be simplified, either via refactoring or changes affecting the implied local backend --------- Co-authored-by: Radek Simko <radeksimko@users.noreply.github.com>	6 months ago
Sarah French	a83b7402c2	PSS: Add tests showing `state` subcommands being used with PSS (#37891) ... * test: Add E2E tests for `state list` and `state show` commands * test: Update `mockPluggableStateStorageProvider` to log a warning during tests where the values in `MockStates` aren't compatible with the `ReadStateBytesFn` default function. Make existing test set an appropriate value in `MockStates`. * test: Update `mockPluggableStateStorageProvider` helper to include a resource schema * test: Add command-level test for `state list` showing integration with pluggable state storage code. * test: Add command-level test for `state show` showing integration with pluggable state storage code. * test: Add command-level test for `state pull` showing integration with pluggable state storage code. * test: Add command-level test for `state identities` showing integration with pluggable state storage code. * test: Add command-level test for `state rm` showing integration with pluggable state storage code. * test: Add command-level test for `state mv` showing integration with pluggable state storage code. * test: Add command-level test for `state push` showing integration with pluggable state storage code. * test: Add command-level test for `state replace-provider` showing integration with pluggable state storage code. * test: Change shared test fixture to not be named after a specific command under test. This test fixure is reused across tests that need the config to define a state store but otherwise rely on the mock provider to set up the test scenario. * test: Update test to use shared test fixture * test: Remove redundant test fixture The internal/command/testdata/state-commands-state-store and internal/command/testdata/state-store-unchanged test fixtures are the same. * fix: Re-add logic for setting chunk size in the context of E2E tests using grpcwrap package This was removed, incorrectly, in https://github.com/hashicorp/terraform/pull/37899 * refactor: Let panic happen if there's incompatibility between mock returned from `mockPluggableStateStorageProvider` and the `MockStates` that's been set in the mock * test: Refactor to contain paths in reused variable, remove unnecessary .gitkeep * test: Remove unneeded test code	6 months ago
Sarah French	3eea12a1d8	test: Add test coverage for what validate command checks in resource blocks versus backend blocks. (#37972) ... * test: Fix typo in test name * test: Show how the validate command validates resource blocks using their schema. * test: Show how the validate command doesn't use backends' schemas when validating backend blocks.	6 months ago
Sarah French	0941763d05	test: Add a test that shows a custom workspace being baked-into a planfile (#37917)	7 months ago
Radek Simko	d884031b4b	PSS: Implement unsetting of a state store (#37875) ... * Remove BackendOpts.ProviderFactory abstraction layer * PSS: Implement unsetting of a state store * address PR feedback	7 months ago
Liam Cervante	cfbfdc5797	providers lock: include test files when loading configuration (#37851)	7 months ago
Max Qian	078ac7cb21	fix: `TestTest_Parallel` adds delay to ensure order (#37890) ... Signed-off-by: Max Qian <zq2@illinois.edu>	7 months ago
James Bardin	39eb8c7fb4	Merge pull request #37854 from hashicorp/jbardin/provider-eval-scope ... Allow inconsistent filesystem function results for provider configuration	7 months ago
Sarah French	f5a28cfa8b	PSS: Update how commands access backends, so both `backend` and `state_store` configuration can be used (#37569) ... * Add a generic method for loading an operations backend in non-init commands * Refactor commands to use new prepareBackend method: group 1 * Refactor commands to use new prepareBackend method: group 2, where config parsing needs to be explicitly added * Refactor commands to use new prepareBackend method: group 3, where we can use already parsed config * Additional, more nested, places where logic for accessing backends needs to be refactored * Remove duplicated comment * Add test coverage of `(m *Meta) prepareBackend()` * Add TODO related to using plans for backend/state_store config in apply commands * Add `testStateStoreMockWithChunkNegotiation` test helper * Add assertions to tests about the backend (remote-state, local, etc) in use within operations backend * Stop prepareBackend taking locks as argument * Code comment in prepareBackend * Replace c.Meta.prepareBackend with c.prepareBackend * Change `c.Meta.loadSingleModule` to `c.loadSingleModule` * Rename (Meta).prepareBackend to (Meta).backend, update godoc comment to make relationship to (Meta).Backend more obvious. * Revert change from config.Module to config.Root.Module * Update `(m *Meta) backend` method to parse config itself, and also to adhere to calling code's viewtype instructions * Update all tests and calling code following previous commit * Change how an operations backend is obtained by autocomplete code * Update autocomplete to return nil if no workspace names are returned from the backend * Add test coverage for autocompleting workspace names when using a pluggable state store * Fix output command: pass view type data to new `backend` method * Fix in plan command: pass correct view type to `backend` method * Fix `providers schema` command to use correct viewtype when preparing a backend	8 months ago
James Bardin	4ce205da74	provider eval scope test	8 months ago
Liam Cervante	e44b870b8b	don't write ephemeral outputs to state (#37821)	8 months ago
Liam Cervante	411f18e6ac	ephemerals: allow root ephemeral outputs in stacks and test (#37813) ... * ephemerals: allow root ephemeral outputs in stacks and test * remember to set new opt for apply stage	8 months ago
Sarah French	efb2a1c567	PSS: Let the `init` command recognise when there are no changes in configuration. (#37777) ... * Pull determining of PSS provider's version from current locks into a separate method * Add code for identifying when config and provider version match existing backend state (i.e. no changes) * Update test - locks are now needed before it hits expected error diag return * Add test showing successful init when no config changes are detected. * Update `getStateStorageProviderVersion` to return nil versions for builtin and re-attached providers. This makes comparison easier when determining if config has changed since last init. * Add test coverage for `getStateStorageProviderVersion` * Move testing fixtures around, preparing for different types of changed state_store config changes being tested * Add test showing that changing the state_store config is detected as a change, but handling this scenario isn't implemented yet * Update hashes in test fixture backend state file to be accurate Previously dummy values were fine, but as tests using hashes to identify changes these values need to be accurate! * Update existing test cases so that Terraform uses the same test provider version as described in the backend state file fixture for the test. * Add test showing that changing the PSS provider's config is detected as a change, but handling this scenario isn't implemented yet * Add test showing that swapping to a different state storage implementation in the same provider is detected as a change, but handling this scenario isn't implemented yet * Add test showing that changing the provider used for PSS is detected as a change, but handling this scenario isn't implemented yet * Add test showing that upgrading a provider is detected as a change, but handling this scenario isn't implemented yet * Update test to use v1.2.3 for consistency with other tests Just to avoid any confusion if copy-pasting happens in future. * More corrections to existing test fixtures - unset config should be null, and replace dummy hash values with correct values. * Fix test for using -reconfigure with state_store; the default workspace would already exist in this scenario * Update TestInit_stateStore_configUnchanged to assert that init was a no-op for backend state * Remove unused fixture * Remove test that's replaced by new tests in command/init_test.go * Replace old references to deleted "state-store-changed" test fixture & update test to not expect a value for region attr in provider config * Make test fixture coupling a little more understandable * Refactor detection of no need to migrate into a function * Add TODO about more involved provider version change tests We will allow downgrades to succeed as long as the schema version number is unchanged * Update (configs.StateStore)Hash method to return a single hash that's impacted by: state store config, provider config, state store type, provider source * Update calling code and test helper code to reflect that the nested provider block no longer has its own hash * Remove test; there is now a single hash that SHOULD be affected by the provider block! * Also use provider name, from config, in hash * Update tests to reflect changes in how hashes are made * Remove unused `stateStoreConfigNeedsMigration` function * Remove duplicate isProviderReattached function. * Fixes to affected tests * Allow provider version to impact the state storage hash, update impacted tests and test fixtures * Update tests that now require locks data to be present in test setup * Update comment for accuracy * Fixes to other test fixtures - remove excess hash field, set hash to 0 to indicate they're not set accurately. * Make upgrade test actually use upgrade code path * Add lock files to test fixture directories that represent a project that's had a successful prior init using PSS	8 months ago
Sarah French	6b73f710f8	PSS: Implement initialisation of new working directory (or use of `-reconfigure` flag) while using `state_store` (#37732) ... * Minor fixes in diagnostics This can only be done once modules have been parsed and the required providers data is available. There are multiple places where config is parsed, into either Config or Module structs, so this needs to be implemented in multiple places. * Rename test to make it specific to use of backend block in config * Update initBackend to accept whole initArgs collection * Only process --backend-config data, when setting up a `backend`, if that data isn't empty * Simplify how mock provider factories are made in tests * Update mock provider's default logic to track and manage existing workspaces * Add `ProviderSchema` method to `Pluggable` structs. This allows calling code to access the provider schema when using provider configuration data. * Add function for converting a providerreqs.Version to a hashicorp/go-version Version. This is needed for using locks when creating the backend state file. * Implement initial version of init new working directories using `stateStore_C_s`. Default to creating the default workspace if no workspaces exist. * Update test fixtures to match the hashicorp/test mock provider used in PSS tests * Allow tests to obtain locks that include `testingOverrides` providers. The `testingOverrides` field will only be set in tests, so this should not impact end users. * Add tests showing TF can initialize a working directory for the first time (and do the same when forced by -reconfigure flag). Remove replaced tests. * Add -create-default-workspace flag, to be used to disable creating the default workspace by default when -input=false (i.e for use in CI). Refactor creation of default workspace logic. Add tests. * Allow reattached providers to be used during init for PSS * Rename variable to `backendHash` so relation to `backend` is clearer * Allow `(m *Meta) Backend` to return warning diagnostics * Protect against nil testingOverrides in providerFactoriesFromLocks * Add test case seeing what happens if default workspace selected, doesn't exist, but other workspaces do exist. The consequences here are due to using `selectWorkspace` in `stateStore_C_s`, matching what's done in `backend_C_r_s`. * Address code consistency check failure on PR * Refactor use of mock in test that's experiencing EOF error... * Remove test that requires test to supply input for user prompt This test passes when run in isolation but fails when run alongside other tests, even when skipping all other tests using `testStdinPipe`. I don't think the value of this test is great enough to start changing how we test stdin input. * Allow -create-default-workspace to be used regardless of whether input is enabled or disabled * Add TF_SKIP_CREATE_DEFAULT_WORKSPACE environment variable * Responses to feedback, including making testStdinPipe helper log details of errors copying data to stdin. Note: We cannot call t.Fatal from a non-test goroutine. * Use Errorf instead * Allow backend state files to not include version data when a builtin or reattached provider is in use. * Add clarifying comment about re-attached providers when finding the matching entry in required_providers * Report that the default workspace was created to the view * Refactor: use error comparison via `errors.Is` to identify when no workspaces exist. * Move handling of TF_ENABLE_PLUGGABLE_STATE_STORAGE into init's ParseInit func. * Validate that PSS-related flags can only be used when experiments are enabled, enforce coupling of PSS-related flags when in use. * Slight rewording of output message about default workspace * Update test to assert new output about default workspace	8 months ago
Sarah French	312f296c2d	PSS: Add `savedStateStore` method to `Meta` (#37558) ... * Add test coverage for Meta's `savedBackend` method * Add new Meta `savedStateStore` method and test coverage * Streamline test - remove unneeded assertions and update comments * Remove marks from config before configuring the provider * Remove marks from config before configuring the state store * Add test case for savedStateStore to assert marks aren't passed * Fix call to ConfigureStateStore * Show that tests pass despite not trying to remove marks * Allow Config methods to add marks when reading pluggable state store config from the backend state file * This code is now necessary to let the tests pass * Stop adding marks to PSS-related config when it's parsed from the backend state file * Stop removing marks that aren't there * Remove unnecessary test related to marks	9 months ago
Samsondeen	2274026c68	query: add -query flag to validate command (#37671)	9 months ago
Liam Cervante	1e414491c7	evaluate: return diagnostics instead of unknown for uninitialised locals and resources (#37663) ... * evaluate: return diagnostics instead of unknown for uninitialised locals and resources * changelog * also input variables	9 months ago
Daniel Schmidt	d83cd73ecf	fix action reference	9 months ago
Samsondeen	8097374c3d	Fix panic when generating json config for tf query (#37596)	9 months ago
Liam Cervante	551ba2e525	Implement controlling destroy functionality within Terraform Test (#37359) ... * Add ability to parse backend blocks present in a test file's run blocks, validate configuration (#36541) * Add ability to parse backend blocks from a run block * Add validation to avoid multiple backend blocks across run blocks that use the same internal state file. Update tests. * Add validation to avoid multiple backend blocks within a single run block. Update tests. * Remove use of quotes in diagnostic messages * Add validation to avoid backend blocks being used in plan run blocks. Update tests. * Correct local backend blocks in new test fixtures * Add test to show that different test files can use same backend block for same state key. * Add validation to enforce state-storage backend types are used * Remove TODO comment We only need to consider one file at a time when checking if a state_key already has a backend associated with it; parallelism in `terraform test` is scoped down to individual files. * Add validation to assert that the backend block must be in the first apply command for an internal state * Consolidate backend block validation inside a single if statement * Add initial version of validation that ensures a backend isn't re-used within a file * Explicitly set the state_key at the point of parsing the config TODO: What should be done with method (moduletest.Run).GetStateKey? * Update test fixture now that reusing backend configs has been made invalid * Add automated test showing validation of reused configuration blocks * Skip test due to flakiness, minor change to test config naming * Update test so it tolerates non-deterministic order run blocks are evaluated in * Remove unnecessary value assignment to r.StateKey * Replace use of GetStateKey() with accessing the state key that's now set during test config parsing * Fix bug so that run blocks using child modules get the correct state key set at parsing time * Update acceptance test to also cover scenario where root and child module state keys are in use * Update test name * Add newline to regex * Ensure consistent place where repeat backend error is raised from * Write leftover test state(s) to file (#36614) * Add additional validation that the backend used in a run is a supported type (#36648) * Prevent test run when leftover state data is present (#36685) * `test`: Set the initial state for a state files from a backend, allow the run that defines a backend to write state to the backend (#36646) * Allow use of backend block to set initial state for a state key * Note about alternative place to keep 'backend factories' * Allow the run block defining the backend to write state to it * Fix rebase * Change to accessing backend init functions via ContextOpts * Add tests demonstrating how runs containing backend blocks use and update persisted state * Fix test fixture * Address test failure due to trouble opening the state file This problem doesn't happen on MacOS, so I assume is due to the Linux environment of GitHub runners. * Fix issue with paths properly I hope * Fix defect in test assertion * Pivot back to approach introduced in 4afc3d7 * Let failing tests write to persistent state, add test case covering that. I split the acceptance tests into happy/unhappy paths for this, which required some of the helper functions' declarations to be raised up to package-level. * Change how we update internal state files, so that information about the associated backend is never lost * Fix UpdateStateFile * Ensure that the states map set by TestStateTransformer associates a backend with the correct run. * Misc spelling fixes in comments and a log * Replace state get/set functions with existing helpers (#36747) * Replace state get/set functions with existing helpers * Compare to string representation of state * Compare to string representation of state * Terraform Test: Allow skipping cleanup of entire test file or individual run blocks (#36729) * Add validation to enforce skip_cleanup=false cannot be used with backend blocks (#36857) * Integrate use of backend blocks in tests with skip_cleanup feature (#36848) * Fix nil pointer error, update test to not be table-driven * Make using a backend block implicitly set skip_cleanup to true * Stop state artefacts being created when a backend is in use and no cleanup errors have occurred * Return diagnostics so calling code knows if cleanup experienced issues or not * Update tests to show that when cleanup fails a state artefact is created * Add comment about why diag not returned * Bug fix - actually pull in the state from the state manager! * Split and simplify (?) tests to show the backend block can create and/or reuse prior state * Update test to use new fixtures, assert about state artefact. Fix nil pointer * Update test fixture in use, add guardrail for flakiness of forced error during cleanup * Refactor so resource ID set in only one place * Add documentation for using a `backend` block during `test` (#36832) * Add backend as a documented block in a run block * Add documentation about backend blocks in run blocks. * Make the relationship between backends and state keys more clear, other improvements * More test documentation (#36838) * Terraform Test: cleanup command (#36847) * Allow cleanup of states that depend on prior runs outputs (#36902) * terraform test: refactor graph edge calculation * create fake run block nodes during cleanup operation * tidy up TODOs * fix tests * remove old changes * Update internal/moduletest/graph/node_state_cleanup.go Co-authored-by: Samsondeen <40821565+dsa0x@users.noreply.github.com> * Improve diagnostics around skip_cleanup conflicts (#37385) * Improve diagnostics around skip_cleanup conflicts * remove unused dynamic node * terraform test: refactor manifest file for simplicity (#37412) * test: refactor apply and plan functions so no run block is needed * terraform test: write and load state manifest files * Terraform Test: Allow skipping cleanup of entire test file or individual run blocks (#36729) * terraform test: add support for skip_cleanup attr * terraform test: add cleanup command * terraform test: add backend blocks * pause * fix tests * remove commented code * terraform test: make controlling destroy functionality experimental (#37419) * address comments * Update internal/moduletest/graph/node_state_cleanup.go Co-authored-by: Samsondeen <40821565+dsa0x@users.noreply.github.com> --------- Co-authored-by: Samsondeen <40821565+dsa0x@users.noreply.github.com> * add experimental changelog entries --------- Co-authored-by: Sarah French <15078782+SarahFrench@users.noreply.github.com> Co-authored-by: Samsondeen <40821565+dsa0x@users.noreply.github.com> Co-authored-by: Samsondeen Dare <samsondeen.dare@hashicorp.com>	9 months ago