Merge branch 'develop' into feat/short

config_examples/config_full.example.json

@@ -8,6 +8,7 @@
     "amend_last_stake_amount": false,
     "last_stake_amount_min_ratio": 0.5,
     "dry_run": true,
+    "dry_run_wallet": 1000,
     "cancel_open_orders_on_exit": false,
     "timeframe": "5m",
     "trailing_stop": false,

docs/hyperopt.md

@@ -508,6 +508,46 @@ class MyAwesomeStrategy(IStrategy):
 
 You will then obviously also change potential interesting entries to parameters to allow hyper-optimization.
 
+### Optimizing `max_entry_position_adjustment`
+
+While `max_entry_position_adjustment` is not a separate space, it can still be used in hyperopt by using the property approach shown above.
+
+``` python
+from pandas import DataFrame
+from functools import reduce
+
+import talib.abstract as ta
+
+from freqtrade.strategy import (BooleanParameter, CategoricalParameter, DecimalParameter, 
+                                IStrategy, IntParameter)
+import freqtrade.vendor.qtpylib.indicators as qtpylib
+
+class MyAwesomeStrategy(IStrategy):
+    stoploss = -0.05
+    timeframe = '15m'
+
+    # Define the parameter spaces
+    max_epa = CategoricalParameter([-1, 0, 1, 3, 5, 10], default=1, space="buy", optimize=True)
+
+    @property
+    def max_entry_position_adjustment(self):
+        return self.max_epa.value
+        
+
+    def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
+        # ...
+```
+
+??? Tip "Using `IntParameter`"
+    You can also use the `IntParameter` for this optimization, but you must explicitly return an integer:
+    ``` python
+    max_epa = IntParameter(-1, 10, default=1, space="buy", optimize=True)
+
+    @property
+    def max_entry_position_adjustment(self):
+        return int(self.max_epa.value)
+    ```
+
 ## Loss-functions
 
 Each hyperparameter tuning requires a target. This is usually defined as a loss function (sometimes also called objective function), which should decrease for more desirable results, and increase for bad results.

docs/includes/pairlists.md

@@ -246,7 +246,7 @@ On exchanges that deduct fees from the receiving currency (e.g. FTX) - this can
 The `low_price_ratio` setting removes pairs where a raise of 1 price unit (pip) is above the `low_price_ratio` ratio.
 This option is disabled by default, and will only apply if set to > 0.
 
-For `PriceFiler` at least one of its `min_price`, `max_price` or `low_price_ratio` settings must be applied.
+For `PriceFilter` at least one of its `min_price`, `max_price` or `low_price_ratio` settings must be applied.
 
 Calculation example:
 

docs/requirements-docs.txt

@@ -1,4 +1,4 @@
 mkdocs==1.2.3
-mkdocs-material==8.1.10
+mkdocs-material==8.2.1
 mdx_truly_sane_lists==1.2
-pymdown-extensions==9.1
+pymdown-extensions==9.2

docs/stoploss.md

@@ -2,6 +2,7 @@
 
 The `stoploss` configuration parameter is loss as ratio that should trigger a sale.
 For example, value `-0.10` will cause immediate sell if the profit dips below -10% for a given trade. This parameter is optional.
+Stoploss calculations do include fees, so a stoploss of -10% is placed exactly 10% below the entry point.
 
 Most of the strategy files already include the optimal `stoploss` value.
 
@@ -30,7 +31,7 @@ These modes can be configured with these values:
 ### stoploss_on_exchange and stoploss_on_exchange_limit_ratio
 
 Enable or Disable stop loss on exchange.
-If the stoploss is *on exchange* it means a stoploss limit order is placed on the exchange immediately after buy order happens successfully. This will protect you against sudden crashes in market as the order will be in the queue immediately and if market goes down then the order has more chance of being fulfilled.
+If the stoploss is *on exchange* it means a stoploss limit order is placed on the exchange immediately after buy order fills. This will protect you against sudden crashes in market, as the order execution happens purely within the exchange, and has no potential network overhead.
 
 If `stoploss_on_exchange` uses limit orders, the exchange needs 2 prices, the stoploss_price and the Limit price.  
 `stoploss` defines the stop-price where the limit order is placed - and limit should be slightly below this.  

freqtrade/exchange/ftx.py

@@ -115,15 +115,18 @@ class Ftx(Exchange):
                 if order[0].get('status') == 'closed':
                     # Trigger order was triggered ...
                     real_order_id = order[0].get('info', {}).get('orderId')
+                    # OrderId may be None for stoploss-market orders
+                    # But contains "average" in these cases.
+                    if real_order_id:
+                        order1 = self._api.fetch_order(real_order_id, pair)
+                        self._log_exchange_response('fetch_stoploss_order1', order1)
+                        # Fake type to stop - as this was really a stop order.
+                        order1['id_stop'] = order1['id']
+                        order1['id'] = order_id
+                        order1['type'] = 'stop'
+                        order1['status_stop'] = 'triggered'
+                        return order1
 
-                    order1 = self._api.fetch_order(real_order_id, pair)
-                    self._log_exchange_response('fetch_stoploss_order1', order1)
-                    # Fake type to stop - as this was really a stop order.
-                    order1['id_stop'] = order1['id']
-                    order1['id'] = order_id
-                    order1['type'] = 'stop'
-                    order1['status_stop'] = 'triggered'
-                    return order1
                 return order[0]
             else:
                 raise InvalidOrderException(f"Could not get stoploss order for id {order_id}")

freqtrade/freqtradebot.py

@@ -344,29 +344,6 @@ class FreqtradeBot(LoggingMixin):
                     self.update_trade_state(trade, order.order_id, send_msg=False)
 
     def handle_insufficient_funds(self, trade: Trade):
-        """
-        Determine if we ever opened a exiting order for this trade.
-        If not, try update entering fees - otherwise "refind" the open order we obviously lost.
-        """
-        exit_order = trade.select_order(trade.exit_side, None)
-        if exit_order:
-            self.refind_lost_order(trade)
-        else:
-            self.reupdate_enter_order_fees(trade)
-
-    def reupdate_enter_order_fees(self, trade: Trade):
-        """
-        Get buy order from database, and try to reupdate.
-        Handles trades where the initial fee-update did not work.
-        """
-        logger.info(f"Trying to reupdate {trade.enter_side} fees for {trade}")
-        order = trade.select_order(trade.enter_side, False)
-        if order:
-            logger.info(
-                f"Updating {trade.enter_side}-fee on trade {trade} for order {order.order_id}.")
-            self.update_trade_state(trade, order.order_id, send_msg=False)
-
-    def refind_lost_order(self, trade):
         """
         Try refinding a lost trade.
         Only used when InsufficientFunds appears on exit orders (stoploss or long sell/short buy).
@@ -379,9 +356,6 @@ class FreqtradeBot(LoggingMixin):
             if not order.ft_is_open:
                 logger.debug(f"Order {order} is no longer open.")
                 continue
-            if order.ft_order_side == trade.enter_side:
-                # Skip buy side - this is handled by reupdate_enter_order_fees
-                continue
             try:
                 fo = self.exchange.fetch_order_or_stoploss_order(order.order_id, order.ft_pair,
                                                                  order.ft_order_side == 'stoploss')
@@ -393,6 +367,9 @@ class FreqtradeBot(LoggingMixin):
                     if fo and fo['status'] == 'open':
                         # Assume this as the open order
                         trade.open_order_id = order.order_id
+                elif order.ft_order_side == trade.enter_side:
+                    if fo and fo['status'] == 'open':
+                        trade.open_order_id = order.order_id
                 if fo:
                     logger.info(f"Found {order} for trade {trade}.")
                     self.update_trade_state(trade, order.order_id, fo,
@@ -1241,12 +1218,12 @@ class FreqtradeBot(LoggingMixin):
 
         # Cancelled orders may have the status of 'canceled' or 'closed'
         if order['status'] not in constants.NON_OPEN_EXCHANGE_STATES:
-            filled_val = order.get('filled', 0.0) or 0.0
+            filled_val: float = order.get('filled', 0.0) or 0.0
             filled_stake = filled_val * trade.open_rate
             minstake = self.exchange.get_min_pair_stake_amount(
                 trade.pair, trade.open_rate, self.strategy.stoploss)
 
-            if filled_val > 0 and filled_stake < minstake:
+            if filled_val > 0 and minstake and filled_stake < minstake:
                 logger.warning(
                     f"Order {trade.open_order_id} for {trade.pair} not cancelled, "
                     f"as the filled amount of {filled_val} would result in an unexitable trade.")

freqtrade/misc.py

@@ -29,18 +29,23 @@ def decimals_per_coin(coin: str):
     return DECIMALS_PER_COIN.get(coin, DECIMAL_PER_COIN_FALLBACK)
 
 
-def round_coin_value(value: float, coin: str, show_coin_name=True) -> str:
+def round_coin_value(
+        value: float, coin: str, show_coin_name=True, keep_trailing_zeros=False) -> str:
     """
     Get price value for this coin
     :param value: Value to be printed
     :param coin: Which coin are we printing the price / value for
     :param show_coin_name: Return string in format: "222.22 USDT" or "222.22"
+    :param keep_trailing_zeros: Keep trailing zeros "222.200" vs. "222.2"
     :return: Formatted / rounded value (with or without coin name)
     """
+    val = f"{value:.{decimals_per_coin(coin)}f}"
+    if not keep_trailing_zeros:
+        val = val.rstrip('0').rstrip('.')
     if show_coin_name:
-        return f"{value:.{decimals_per_coin(coin)}f} {coin}"
-    else:
-        return f"{value:.{decimals_per_coin(coin)}f}"
+        val = f"{val} {coin}"
+
+    return val
 
 
 def shorten_date(_date: str) -> str:

freqtrade/optimize/backtesting.py

@@ -408,6 +408,18 @@ class Backtesting:
                     # use Open rate if open_rate > calculated sell rate
                     return sell_row[OPEN_IDX]
 
+                if (
+                    trade_dur == 0
+                    # Red candle (for longs), TODO: green candle (for shorts)
+                    and sell_row[OPEN_IDX] > sell_row[CLOSE_IDX]  # Red candle
+                    and trade.open_rate < sell_row[OPEN_IDX]  # trade-open below open_rate
+                    and close_rate > sell_row[CLOSE_IDX]
+                ):
+                    # ROI on opening candles with custom pricing can only
+                    # trigger if the entry was at Open or lower.
+                    # details: https: // github.com/freqtrade/freqtrade/issues/6261
+                    # If open_rate is < open, only allow sells below the close on red candles.
+                    raise ValueError("Opening candle ROI on red candles.")
                 # Use the maximum between close_rate and low as we
                 # cannot sell outside of a candle.
                 # Applies when a new ROI setting comes in place and the whole candle is above that.
@@ -471,7 +483,10 @@ class Backtesting:
             trade.close_date = sell_candle_time
 
             trade_dur = int((trade.close_date_utc - trade.open_date_utc).total_seconds() // 60)
-            closerate = self._get_close_rate(sell_row, trade, sell, trade_dur)
+            try:
+                closerate = self._get_close_rate(sell_row, trade, sell, trade_dur)
+            except ValueError:
+                return None
             # call the custom exit price,with default value as previous closerate
             current_profit = trade.calc_profit_ratio(closerate)
             order_type = self.strategy.order_types['sell']

freqtrade/optimize/hyperopt_tools.py

@@ -373,7 +373,7 @@ class HyperoptTools():
 
         trials[f"Max Drawdown{' (Acct)' if has_account_drawdown else ''}"] = trials.apply(
             lambda x: "{} {}".format(
-                round_coin_value(x['max_drawdown_abs'], stake_currency),
+                round_coin_value(x['max_drawdown_abs'], stake_currency, keep_trailing_zeros=True),
                 (f"({x['max_drawdown_account']:,.2%})"
                     if has_account_drawdown
                     else f"({x['max_drawdown']:,.2%})"
@@ -388,7 +388,7 @@ class HyperoptTools():
 
         trials['Profit'] = trials.apply(
             lambda x: '{} {}'.format(
-                round_coin_value(x['Total profit'], stake_currency),
+                round_coin_value(x['Total profit'], stake_currency, keep_trailing_zeros=True),
                 f"({x['Profit']:,.2%})".rjust(10, ' ')
             ).rjust(25+len(stake_currency))
             if x['Total profit'] != 0.0 else '--'.rjust(25+len(stake_currency)),

freqtrade/persistence/migrations.py

@@ -208,6 +208,13 @@ def migrate_orders_table(engine, table_back_name: str, cols: List):
             """))
 
 
+def set_sqlite_to_wal(engine):
+    if engine.name == 'sqlite' and str(engine.url) != 'sqlite://':
+        # Set Mode to
+        with engine.begin() as connection:
+            connection.execute(text("PRAGMA journal_mode=wal"))
+
+
 def check_migrate(engine, decl_base, previous_tables) -> None:
     """
     Checks if migration is necessary and migrates if necessary
@@ -235,3 +242,4 @@ def check_migrate(engine, decl_base, previous_tables) -> None:
     if 'orders' not in previous_tables and 'trades' in previous_tables:
         logger.info('Moving open orders to Orders table.')
         migrate_open_orders_to_trades(engine)
+    set_sqlite_to_wal(engine)

freqtrade/persistence/models.py

@@ -40,6 +40,9 @@ def init_db(db_url: str, clean_open_orders: bool = False) -> None:
     """
     kwargs = {}
 
+    if db_url == 'sqlite:///':
+        raise OperationalException(
+            f'Bad db-url {db_url}. For in-memory database, please use `sqlite://`.')
     if db_url == 'sqlite://':
         kwargs.update({
             'poolclass': StaticPool,
@@ -885,13 +888,13 @@ class LocalTrade():
             self, order_side: str = None, is_open: Optional[bool] = None) -> Optional[Order]:
         """
         Finds latest order for this orderside and status
-        :param order_side: Side of the order (either 'buy' or 'sell')
+        :param order_side: ft_order_side of the order (either 'buy', 'sell' or 'stoploss')
         :param is_open: Only search for open orders?
         :return: latest Order object if it exists, else None
         """
         orders = self.orders
         if order_side:
-            orders = [o for o in self.orders if o.side == order_side]
+            orders = [o for o in self.orders if o.ft_order_side == order_side]
         if is_open is not None:
             orders = [o for o in orders if o.ft_is_open == is_open]
         if len(orders) > 0:
@@ -1025,11 +1028,11 @@ class Trade(_DECL_BASE, LocalTrade):
     fee_close = Column(Float, nullable=False, default=0.0)
     fee_close_cost = Column(Float, nullable=True)
     fee_close_currency = Column(String(25), nullable=True)
-    open_rate = Column(Float)
+    open_rate: float = Column(Float)
     open_rate_requested = Column(Float)
     # open_trade_value - calculated via _calc_open_trade_value
     open_trade_value = Column(Float)
-    close_rate = Column(Float)
+    close_rate: Optional[float] = Column(Float)
     close_rate_requested = Column(Float)
     close_profit = Column(Float)
     close_profit_abs = Column(Float)

freqtrade/rpc/api_server/api_backtest.py

@@ -20,6 +20,7 @@ router = APIRouter()
 
 
 @router.post('/backtest', response_model=BacktestResponse, tags=['webserver', 'backtest'])
+# flake8: noqa: C901
 async def api_start_backtest(bt_settings: BacktestRequest, background_tasks: BackgroundTasks,
                              config=Depends(get_config)):
     """Start backtesting if not done so already"""
@@ -32,6 +33,10 @@ async def api_start_backtest(bt_settings: BacktestRequest, background_tasks: Bac
     for setting in settings.keys():
         if settings[setting] is not None:
             btconfig[setting] = settings[setting]
+    try:
+        btconfig['stake_amount'] = float(btconfig['stake_amount'])
+    except ValueError:
+        pass
 
     # Force dry-run for backtesting
     btconfig['dry_run'] = True
@@ -57,8 +62,7 @@ async def api_start_backtest(bt_settings: BacktestRequest, background_tasks: Bac
             ):
                 from freqtrade.optimize.backtesting import Backtesting
                 ApiServer._bt = Backtesting(btconfig)
-                if ApiServer._bt.timeframe_detail:
-                    ApiServer._bt.load_bt_data_detail()
+                ApiServer._bt.load_bt_data_detail()
             else:
                 ApiServer._bt.config = btconfig
                 ApiServer._bt.init_backtest()

freqtrade/rpc/api_server/api_schemas.py

@@ -152,7 +152,7 @@ class ShowConfig(BaseModel):
     trading_mode: str
     short_allowed: bool
     stake_currency: str
-    stake_amount: Union[float, str]
+    stake_amount: str
     available_capital: Optional[float]
     stake_currency_decimals: int
     max_open_trades: int
@@ -291,6 +291,7 @@ class ForceEnterPayload(BaseModel):
     price: Optional[float]
     ordertype: Optional[OrderTypeValues]
     stakeamount: Optional[float]
+    entry_tag: Optional[str]
 
 
 class ForceExitPayload(BaseModel):
@@ -380,7 +381,7 @@ class BacktestRequest(BaseModel):
     timeframe_detail: Optional[str]
     timerange: Optional[str]
     max_open_trades: Optional[int]
-    stake_amount: Optional[Union[float, str]]
+    stake_amount: Optional[str]
     enable_protections: bool
     dry_run_wallet: Optional[float]
 

freqtrade/rpc/api_server/api_v1.py

@@ -141,9 +141,11 @@ def show_config(rpc: Optional[RPC] = Depends(get_rpc_optional), config=Depends(g
 def forceentry(payload: ForceEnterPayload, rpc: RPC = Depends(get_rpc)):
     ordertype = payload.ordertype.value if payload.ordertype else None
     stake_amount = payload.stakeamount if payload.stakeamount else None
+    entry_tag = payload.entry_tag if payload.entry_tag else None
 
     trade = rpc._rpc_force_entry(payload.pair, payload.price, order_side=payload.side,
-                                 order_type=ordertype, stake_amount=stake_amount)
+                                 order_type=ordertype, stake_amount=stake_amount,
+                                 enter_tag=entry_tag)
 
     if trade:
         return ForceEnterResponse.parse_obj(trade.to_json())

freqtrade/rpc/rpc.py

@@ -116,7 +116,7 @@ class RPC:
             'short_allowed': config.get('trading_mode', 'spot') != 'spot',
             'stake_currency': config['stake_currency'],
             'stake_currency_decimals': decimals_per_coin(config['stake_currency']),
-            'stake_amount': config['stake_amount'],
+            'stake_amount': str(config['stake_amount']),
             'available_capital': config.get('available_capital'),
             'max_open_trades': (config['max_open_trades']
                                 if config['max_open_trades'] != float('inf') else -1),
@@ -606,11 +606,6 @@ class RPC:
                 'est_stake': est_stake or 0,
                 'stake': stake_currency,
             })
-        if total == 0.0:
-            if self._freqtrade.config['dry_run']:
-                raise RPCException('Running in Dry Run, balances are not available.')
-            else:
-                raise RPCException('All balances are zero.')
 
         value = self._fiat_converter.convert_amount(
             total, stake_currency, fiat_display_currency) if self._fiat_converter else 0
@@ -727,7 +722,8 @@ class RPC:
     def _rpc_force_entry(self, pair: str, price: Optional[float], *,
                          order_type: Optional[str] = None,
                          order_side: SignalDirection = SignalDirection.LONG,
-                         stake_amount: Optional[float] = None) -> Optional[Trade]:
+                         stake_amount: Optional[float] = None,
+                         enter_tag: Optional[str] = None) -> Optional[Trade]:
         """
         Handler for forcebuy <asset> <price>
         Buys a pair trade at the given or current price
@@ -765,7 +761,8 @@ class RPC:
                 'forcebuy', self._freqtrade.strategy.order_types['buy'])
         if self._freqtrade.execute_entry(pair, stake_amount, price,
                                          ordertype=order_type, trade=trade,
-                                         is_short=(order_side == SignalDirection.SHORT)
+                                         is_short=(order_side == SignalDirection.SHORT),
+                                         enter_tag=enter_tag,
                                          ):
             Trade.commit()
             trade = Trade.get_trades([Trade.is_open.is_(True), Trade.pair == pair]).first()

freqtrade/rpc/telegram.py

@@ -813,12 +813,13 @@ class Telegram(RPCHandler):
             output = ''
             if self._config['dry_run']:
                 output += "*Warning:* Simulated balances in Dry Mode.\n"
-
-            output += ("Starting capital: "
-                       f"`{result['starting_capital']}` {self._config['stake_currency']}"
-                       )
-            output += (f" `{result['starting_capital_fiat']}` "
-                       f"{self._config['fiat_display_currency']}.\n"
+            starting_cap = round_coin_value(
+                result['starting_capital'], self._config['stake_currency'])
+            output += f"Starting capital: `{starting_cap}`"
+            starting_cap_fiat = round_coin_value(
+                result['starting_capital_fiat'], self._config['fiat_display_currency']
+            ) if result['starting_capital_fiat'] > 0 else ''
+            output += (f" `, {starting_cap_fiat}`.\n"
                        ) if result['starting_capital_fiat'] > 0 else '.\n'
 
             total_dust_balance = 0
@@ -937,10 +938,11 @@ class Telegram(RPCHandler):
             self._send_msg(str(e))
 
     def _forceenter_action(self, pair, price: Optional[float], order_side: SignalDirection):
-        try:
-            self._rpc._rpc_force_entry(pair, price, order_side=order_side)
-        except RPCException as e:
-            self._send_msg(str(e))
+        if pair != 'cancel':
+            try:
+                self._rpc._rpc_force_entry(pair, price, order_side=order_side)
+            except RPCException as e:
+                self._send_msg(str(e))
 
     def _forceenter_inline(self, update: Update, _: CallbackContext) -> None:
         if update.callback_query:
@@ -975,12 +977,13 @@ class Telegram(RPCHandler):
             whitelist = self._rpc._rpc_whitelist()['whitelist']
             pair_buttons = [
                 InlineKeyboardButton(text=pair, callback_data=f"{pair}_||_{order_side}")
-                for pair in whitelist
+                for pair in sorted(whitelist)
             ]
+            buttons_aligned = self._layout_inline_keyboard(pair_buttons)
 
+            buttons_aligned.append([InlineKeyboardButton(text='Cancel', callback_data='cancel')])
             self._send_msg(msg="Which pair?",
-                           keyboard=self._layout_inline_keyboard(pair_buttons),
-                           callback_path="update_forcelong",
+                           keyboard=buttons_aligned,
                            query=update.callback_query)
 
     @authorized_only

freqtrade/strategy/interface.py

@@ -800,7 +800,7 @@ class IStrategy(ABC, HyperStrategyMixin):
         else:
             return False
 
-    def should_exit(self, trade: Trade, rate: float, date: datetime, *,
+    def should_exit(self, trade: Trade, rate: float, current_time: datetime, *,
                     enter: bool, exit_: bool,
                     low: float = None, high: float = None,
                     force_stoploss: float = 0) -> SellCheckTuple:
@@ -819,7 +819,8 @@ class IStrategy(ABC, HyperStrategyMixin):
         trade.adjust_min_max_rates(high or current_rate, low or current_rate)
 
         stoplossflag = self.stop_loss_reached(current_rate=current_rate, trade=trade,
-                                              current_time=date, current_profit=current_profit,
+                                              current_time=current_time,
+                                              current_profit=current_profit,
                                               force_stoploss=force_stoploss, low=low, high=high)
 
         # Set current rate to high for backtesting sell
@@ -829,7 +830,7 @@ class IStrategy(ABC, HyperStrategyMixin):
         # if enter signal and ignore_roi is set, we don't need to evaluate min_roi.
         roi_reached = (not (enter and self.ignore_roi_if_buy_signal)
                        and self.min_roi_reached(trade=trade, current_profit=current_profit,
-                                                current_time=date))
+                                                current_time=current_time))
 
         sell_signal = SellType.NONE
         custom_reason = ''
@@ -846,8 +847,8 @@ class IStrategy(ABC, HyperStrategyMixin):
             else:
                 trade_type = "exit_short" if trade.is_short else "sell"
                 custom_reason = strategy_safe_wrapper(self.custom_sell, default_retval=False)(
-                    pair=trade.pair, trade=trade, current_time=date, current_rate=current_rate,
-                    current_profit=current_profit)
+                    pair=trade.pair, trade=trade, current_time=current_time,
+                    current_rate=current_rate, current_profit=current_profit)
                 if custom_reason:
                     sell_signal = SellType.CUSTOM_SELL
                     if isinstance(custom_reason, str):

requirements-dev.txt

@@ -7,8 +7,8 @@ coveralls==3.3.1
 flake8==4.0.1
 flake8-tidy-imports==4.6.0
 mypy==0.931
-pytest==7.0.0
-pytest-asyncio==0.17.2
+pytest==7.0.1
+pytest-asyncio==0.18.1
 pytest-cov==3.0.0
 pytest-mock==3.7.0
 pytest-random-order==1.0.4
@@ -17,12 +17,12 @@ isort==5.10.1
 time-machine==2.6.0
 
 # Convert jupyter notebooks to markdown documents
-nbconvert==6.4.1
+nbconvert==6.4.2
 
 # mypy types
 types-cachetools==4.2.9
 types-filelock==3.2.5
-types-requests==2.27.8
+types-requests==2.27.10
 types-tabulate==0.8.5
 
 # Extensions to datetime library

requirements-hyperopt.txt

@@ -5,6 +5,6 @@
 scipy==1.8.0
 scikit-learn==1.0.2
 scikit-optimize==0.9.0
-filelock==3.4.2
+filelock==3.6.0
 joblib==1.1.0
 progressbar2==4.0.0

requirements-plot.txt

@@ -1,5 +1,5 @@
 # Include all requirements to run the bot.
 -r requirements.txt
 
-plotly==5.5.0
+plotly==5.6.0
 

requirements.txt

@@ -1,8 +1,8 @@
 numpy==1.22.2
-pandas==1.4.0
+pandas==1.4.1
 pandas-ta==0.3.14b
 
-ccxt==1.73.17
+ccxt==1.73.70
 # Pin cryptography for now due to rust build errors with piwheels
 cryptography==36.0.1
 aiohttp==3.8.1
@@ -25,13 +25,13 @@ blosc==1.10.6
 py_find_1st==1.1.5
 
 # Load ticker files 30% faster
-python-rapidjson==1.5
+python-rapidjson==1.6
 
 # Notify systemd
 sdnotify==0.3.2
 
 # API Server
-fastapi==0.73.0
+fastapi==0.74.0
 uvicorn==0.17.4
 pyjwt==2.3.0
 aiofiles==0.8.0
@@ -41,7 +41,7 @@ psutil==5.9.0
 colorama==0.4.4
 # Building config files interactively
 questionary==1.10.0
-prompt-toolkit==3.0.26
+prompt-toolkit==3.0.28
 # Extensions to datetime library
 python-dateutil==2.8.2
 

tests/exchange/test_ftx.py

@@ -174,7 +174,7 @@ def test_stoploss_adjust_ftx(mocker, default_conf, sl1, sl2, sl3, side):
     assert not exchange.stoploss_adjust(sl3, order, side=side)
 
 
-def test_fetch_stoploss_order(default_conf, mocker, limit_sell_order, limit_buy_order):
+def test_fetch_stoploss_order_ftx(default_conf, mocker, limit_sell_order, limit_buy_order):
     default_conf['dry_run'] = True
     order = MagicMock()
     order.myid = 123
@@ -196,9 +196,15 @@ def test_fetch_stoploss_order(default_conf, mocker, limit_sell_order, limit_buy_
     with pytest.raises(InvalidOrderException, match=r"Could not get stoploss order for id X"):
         exchange.fetch_stoploss_order('X', 'TKN/BTC')['status']
 
-    api_mock.fetch_orders = MagicMock(return_value=[{'id': 'X', 'status': 'closed'}])
+    # stoploss Limit order
+    api_mock.fetch_orders = MagicMock(return_value=[
+        {'id': 'X', 'status': 'closed',
+         'info': {
+             'orderId': 'mocked_limit_sell',
+         }}])
     api_mock.fetch_order = MagicMock(return_value=limit_sell_order)
 
+    # No orderId field - no call to fetch_order
     resp = exchange.fetch_stoploss_order('X', 'TKN/BTC')
     assert resp
     assert api_mock.fetch_order.call_count == 1
@@ -207,15 +213,16 @@ def test_fetch_stoploss_order(default_conf, mocker, limit_sell_order, limit_buy_
     assert resp['type'] == 'stop'
     assert resp['status_stop'] == 'triggered'
 
-    api_mock.fetch_order = MagicMock(return_value=limit_buy_order)
-
+    # Stoploss market order
+    # Contains no new Order, but "average" instead
+    order = {'id': 'X', 'status': 'closed', 'info': {'orderId': None}, 'average': 0.254}
+    api_mock.fetch_orders = MagicMock(return_value=[order])
+    api_mock.fetch_order.reset_mock()
     resp = exchange.fetch_stoploss_order('X', 'TKN/BTC')
     assert resp
-    assert api_mock.fetch_order.call_count == 1
-    assert resp['id_stop'] == 'mocked_limit_buy'
-    assert resp['id'] == 'X'
-    assert resp['type'] == 'stop'
-    assert resp['status_stop'] == 'triggered'
+    # fetch_order not called (no regular order ID)
+    assert api_mock.fetch_order.call_count == 0
+    assert order == order
 
     with pytest.raises(InvalidOrderException):
         api_mock.fetch_orders = MagicMock(side_effect=ccxt.InvalidOrder("Order not found"))

tests/optimize/test_backtest_detail.py

@@ -562,25 +562,39 @@ tc35 = BTContainer(data=[
 )
 
 # Test 36: Custom-entry-price around candle low
-# Causes immediate ROI exit. This is currently expected behavior (#6261)
-# https://github.com/freqtrade/freqtrade/issues/6261
-# But may change at a later point.
+# Would cause immediate ROI exit, but since the trade was entered
+# below open, we treat this as cheating, and delay the sell by 1 candle.
+# details: https://github.com/freqtrade/freqtrade/issues/6261
 tc36 = BTContainer(data=[
     # D   O     H     L     C    V    B  S   BT
     [0, 5000, 5050, 4950, 5000, 6172, 1, 0],
-    [1, 5000, 5500, 4951, 5000, 6172, 0, 0],    # Enter and immediate ROI
+    [1, 5000, 5500, 4951, 4999, 6172, 0, 0],    # Enter and immediate ROI
     [2, 4900, 5250, 4500, 5100, 6172, 0, 0],
     [3, 5100, 5100, 4650, 4750, 6172, 0, 0],
     [4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
-    stop_loss=-0.01, roi={"0": 0.10}, profit_perc=0.1,
+    stop_loss=-0.10, roi={"0": 0.01}, profit_perc=0.01,
     custom_entry_price=4952,
-    trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1)]
+    trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=2)]
 )
 
+# Test 37: Custom-entry-price around candle low
+# Would cause immediate ROI exit below close
+# details: https://github.com/freqtrade/freqtrade/issues/6261
+tc37 = BTContainer(data=[
+    # D   O     H     L     C    V    B  S   BT
+    [0, 5000, 5050, 4950, 5000, 6172, 1, 0],
+    [1, 5400, 5500, 4951, 5100, 6172, 0, 0],    # Enter and immediate ROI
+    [2, 4900, 5250, 4500, 5100, 6172, 0, 0],
+    [3, 5100, 5100, 4650, 4750, 6172, 0, 0],
+    [4, 4750, 4950, 4350, 4750, 6172, 0, 0]],
+    stop_loss=-0.10, roi={"0": 0.01}, profit_perc=0.01,
+    custom_entry_price=4952,
+    trades=[BTrade(sell_reason=SellType.ROI, open_tick=1, close_tick=1)]
+)
 
-# Test 37: Custom exit price below all candles
+# Test 38: Custom exit price below all candles
 # Price adjusted to candle Low.
-tc37 = BTContainer(data=[
+tc38 = BTContainer(data=[
     # D   O     H     L     C    V    B  S   BT
     [0, 5000, 5050, 4950, 5000, 6172, 1, 0],
     [1, 5000, 5500, 4951, 5000, 6172, 0, 0],
@@ -593,9 +607,9 @@ tc37 = BTContainer(data=[
     trades=[BTrade(sell_reason=SellType.SELL_SIGNAL, open_tick=1, close_tick=3)]
 )
 
-# Test 38: Custom exit price above all candles
+# Test 39: Custom exit price above all candles
 # causes sell signal timeout
-tc38 = BTContainer(data=[
+tc39 = BTContainer(data=[
     # D   O     H     L     C    V    B  S   BT
     [0, 5000, 5050, 4950, 5000, 6172, 1, 0],
     [1, 5000, 5500, 4951, 5000, 6172, 0, 0],

tests/rpc/test_rpc_telegram.py

@@ -776,7 +776,7 @@ def test_profit_handle(default_conf, update, ticker, ticker_sell_up, fee,
     assert 'No closed trade' in msg_mock.call_args_list[-1][0][0]
     assert '*ROI:* All trades' in msg_mock.call_args_list[-1][0][0]
     mocker.patch('freqtrade.wallets.Wallets.get_starting_balance', return_value=0.01)
-    assert ('∙ `-0.00000500 BTC (-0.50%) (-0.0 \N{GREEK CAPITAL LETTER SIGMA}%)`'
+    assert ('∙ `-0.000005 BTC (-0.50%) (-0.0 \N{GREEK CAPITAL LETTER SIGMA}%)`'
             in msg_mock.call_args_list[-1][0][0])
     msg_mock.reset_mock()
 
@@ -852,7 +852,7 @@ def test_telegram_balance_handle(default_conf, update, mocker, rpc_balance, tick
     assert '*XRP:*' not in result
     assert 'Balance:' in result
     assert 'Est. BTC:' in result
-    assert 'BTC: 12.00000000' in result
+    assert 'BTC: 12' in result
     assert "*3 Other Currencies (< 0.0001 BTC):*" in result
     assert 'BTC: 0.00000309' in result
 
@@ -868,7 +868,7 @@ def test_balance_handle_empty_response(default_conf, update, mocker) -> None:
     telegram._balance(update=update, context=MagicMock())
     result = msg_mock.call_args_list[0][0][0]
     assert msg_mock.call_count == 1
-    assert 'All balances are zero.' in result
+    assert 'Starting capital: `0 BTC' in result
 
 
 def test_balance_handle_empty_response_dry(default_conf, update, mocker) -> None:
@@ -881,7 +881,7 @@ def test_balance_handle_empty_response_dry(default_conf, update, mocker) -> None
     result = msg_mock.call_args_list[0][0][0]
     assert msg_mock.call_count == 1
     assert "*Warning:* Simulated balances in Dry Mode." in result
-    assert "Starting capital: `1000` BTC" in result
+    assert "Starting capital: `1000 BTC`" in result
 
 
 def test_balance_handle_too_large_response(default_conf, update, mocker) -> None:
@@ -1277,7 +1277,8 @@ def test_forceenter_no_pair(default_conf, update, mocker) -> None:
     assert msg_mock.call_args_list[0][1]['msg'] == 'Which pair?'
     # assert msg_mock.call_args_list[0][1]['callback_query_handler'] == 'forcebuy'
     keyboard = msg_mock.call_args_list[0][1]['keyboard']
-    assert reduce(lambda acc, x: acc + len(x), keyboard, 0) == 4
+    # One additional button - cancel
+    assert reduce(lambda acc, x: acc + len(x), keyboard, 0) == 5
     update = MagicMock()
     update.callback_query = MagicMock()
     update.callback_query.data = 'XRP/USDT_||_long'
@@ -1760,7 +1761,7 @@ def test_send_msg_buy_notification(default_conf, mocker, caplog, message_type,
         'leverage': leverage,
         'limit': 1.099e-05,
         'order_type': 'limit',
-        'stake_amount': 0.001,
+        'stake_amount': 0.01465333,
         'stake_amount_fiat': 0.0,
         'stake_currency': 'BTC',
         'fiat_currency': 'USD',
@@ -1780,7 +1781,7 @@ def test_send_msg_buy_notification(default_conf, mocker, caplog, message_type,
         f'{leverage_text}'
         '*Open Rate:* `0.00001099`\n'
         '*Current Rate:* `0.00001099`\n'
-        '*Total:* `(0.00100000 BTC, 12.345 USD)`'
+        '*Total:* `(0.01465333 BTC, 180.895 USD)`'
     )
 
     freqtradebot.config['telegram']['notification_settings'] = {'buy': 'off'}
@@ -1865,7 +1866,7 @@ def test_send_msg_buy_fill_notification(default_conf, mocker, message_type, ente
         'exchange': 'Binance',
         'pair': 'ETH/BTC',
         'leverage': leverage,
-        'stake_amount': 0.001,
+        'stake_amount': 0.01465333,
         # 'stake_amount_fiat': 0.0,
         'stake_currency': 'BTC',
         'fiat_currency': 'USD',
@@ -1880,7 +1881,7 @@ def test_send_msg_buy_fill_notification(default_conf, mocker, message_type, ente
         '*Amount:* `1333.33333333`\n'
         f"{leverage_text}"
         '*Open Rate:* `0.00001099`\n'
-        '*Total:* `(0.00100000 BTC, 12.345 USD)`'
+        '*Total:* `(0.01465333 BTC, 180.895 USD)`'
         )
 
 
@@ -2095,7 +2096,7 @@ def test_send_msg_buy_notification_no_fiat(
         'leverage': leverage,
         'limit': 1.099e-05,
         'order_type': 'limit',
-        'stake_amount': 0.001,
+        'stake_amount': 0.01465333,
         'stake_amount_fiat': 0.0,
         'stake_currency': 'BTC',
         'fiat_currency': None,
@@ -2112,7 +2113,7 @@ def test_send_msg_buy_notification_no_fiat(
         f'{leverage_text}'
         '*Open Rate:* `0.00001099`\n'
         '*Current Rate:* `0.00001099`\n'
-        '*Total:* `(0.00100000 BTC)`'
+        '*Total:* `(0.01465333 BTC)`'
     )
 
 

tests/strategy/test_interface.py

@@ -445,7 +445,8 @@ def test_stop_loss_reached(default_conf, fee, profit, adjusted, expected, traili
         strategy.custom_stoploss = custom_stop
 
     now = arrow.utcnow().datetime
-    sl_flag = strategy.stop_loss_reached(current_rate=trade.open_rate * (1 + profit), trade=trade,
+    current_rate = trade.open_rate * (1 + profit)
+    sl_flag = strategy.stop_loss_reached(current_rate=current_rate, trade=trade,
                                          current_time=now, current_profit=profit,
                                          force_stoploss=0, high=None)
     assert isinstance(sl_flag, SellCheckTuple)
@@ -455,8 +456,9 @@ def test_stop_loss_reached(default_conf, fee, profit, adjusted, expected, traili
     else:
         assert sl_flag.sell_flag is True
     assert round(trade.stop_loss, 2) == adjusted
+    current_rate2 = trade.open_rate * (1 + profit2)
 
-    sl_flag = strategy.stop_loss_reached(current_rate=trade.open_rate * (1 + profit2), trade=trade,
+    sl_flag = strategy.stop_loss_reached(current_rate=current_rate2, trade=trade,
                                          current_time=now, current_profit=profit2,
                                          force_stoploss=0, high=None)
     assert sl_flag.sell_type == expected2

tests/test_freqtradebot.py

@@ -2730,8 +2730,7 @@ def test_check_handle_timedout_exception(default_conf_usdt, ticker_usdt, open_tr
 
 
 @pytest.mark.parametrize("is_short", [False, True])
-def test_handle_cancel_enter(mocker, caplog, default_conf_usdt, limit_order,
-                             is_short) -> None:
+def test_handle_cancel_enter(mocker, caplog, default_conf_usdt, limit_order, is_short) -> None:
     patch_RPCManager(mocker)
     patch_exchange(mocker)
     l_order = limit_order[enter_side(is_short)]
@@ -2775,6 +2774,9 @@ def test_handle_cancel_enter(mocker, caplog, default_conf_usdt, limit_order,
     mocker.patch('freqtrade.exchange.Exchange.cancel_order_with_result', cancel_order_mock)
     assert not freqtrade.handle_cancel_enter(trade, l_order, reason)
     assert log_has_re(r"Order .* for .* not cancelled.", caplog)
+    # min_pair_stake empty should not crash
+    mocker.patch('freqtrade.exchange.Exchange.get_min_pair_stake_amount', return_value=None)
+    assert not freqtrade.handle_cancel_enter(trade, limit_order[enter_side(is_short)], reason)
 
 
 @pytest.mark.parametrize("is_short", [False, True])
@@ -4609,23 +4611,17 @@ def test_reupdate_enter_order_fees(mocker, default_conf_usdt, fee, caplog, is_sh
     freqtrade = get_patched_freqtradebot(mocker, default_conf_usdt)
     mock_uts = mocker.patch('freqtrade.freqtradebot.FreqtradeBot.update_trade_state')
 
-    create_mock_trades(fee, is_short=is_short)
+    mocker.patch('freqtrade.exchange.Exchange.fetch_order_or_stoploss_order',
+                 return_value={'status': 'open'})
+    create_mock_trades(fee, is_short)
     trades = Trade.get_trades().all()
 
-    freqtrade.reupdate_enter_order_fees(trades[0])
-    assert log_has_re(
-        f"Trying to reupdate {enter_side(is_short)} "
-        r"fees for .*",
-        caplog
-    )
+    freqtrade.handle_insufficient_funds(trades[3])
+    # assert log_has_re(r"Trying to reupdate buy fees for .*", caplog)
     assert mock_uts.call_count == 1
-    assert mock_uts.call_args_list[0][0][0] == trades[0]
-    assert mock_uts.call_args_list[0][0][1] == mock_order_1(is_short=is_short)['id']
-    assert log_has_re(
-        f"Updating {enter_side(is_short)}-fee on trade "
-        r".* for order .*\.",
-        caplog
-    )
+    assert mock_uts.call_args_list[0][0][0] == trades[3]
+    assert mock_uts.call_args_list[0][0][1] == mock_order_4(is_short)['id']
+    assert log_has_re(r"Trying to refind lost order for .*", caplog)
     mock_uts.reset_mock()
     caplog.clear()
 
@@ -4644,55 +4640,14 @@ def test_reupdate_enter_order_fees(mocker, default_conf_usdt, fee, caplog, is_sh
     )
     Trade.query.session.add(trade)
 
-    freqtrade.reupdate_enter_order_fees(trade)
-    assert log_has_re(f"Trying to reupdate {enter_side(is_short)} fees for "
-                      r".*", caplog)
+    freqtrade.handle_insufficient_funds(trade)
+    # assert log_has_re(r"Trying to reupdate buy fees for .*", caplog)
     assert mock_uts.call_count == 0
-    assert not log_has_re(f"Updating {enter_side(is_short)}-fee on trade "
-                          r".* for order .*\.", caplog)
-
-
-@pytest.mark.usefixtures("init_persistence")
-def test_handle_insufficient_funds(mocker, default_conf_usdt, fee):
-    freqtrade = get_patched_freqtradebot(mocker, default_conf_usdt)
-    mock_rlo = mocker.patch('freqtrade.freqtradebot.FreqtradeBot.refind_lost_order')
-    mock_bof = mocker.patch('freqtrade.freqtradebot.FreqtradeBot.reupdate_enter_order_fees')
-    create_mock_trades(fee, is_short=False)
-    trades = Trade.get_trades().all()
-
-    # Trade 0 has only a open buy order, no closed order
-    freqtrade.handle_insufficient_funds(trades[0])
-    assert mock_rlo.call_count == 0
-    assert mock_bof.call_count == 1
-
-    mock_rlo.reset_mock()
-    mock_bof.reset_mock()
-
-    # Trade 1 has closed buy and sell orders
-    freqtrade.handle_insufficient_funds(trades[1])
-    assert mock_rlo.call_count == 1
-    assert mock_bof.call_count == 0
-
-    mock_rlo.reset_mock()
-    mock_bof.reset_mock()
-
-    # Trade 2 has closed buy and sell orders
-    freqtrade.handle_insufficient_funds(trades[2])
-    assert mock_rlo.call_count == 1
-    assert mock_bof.call_count == 0
-
-    mock_rlo.reset_mock()
-    mock_bof.reset_mock()
-
-    # Trade 3 has an opne buy order
-    freqtrade.handle_insufficient_funds(trades[3])
-    assert mock_rlo.call_count == 0
-    assert mock_bof.call_count == 1
 
 
 @pytest.mark.usefixtures("init_persistence")
 @pytest.mark.parametrize("is_short", [False, True])
-def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
+def test_handle_insufficient_funds(mocker, default_conf_usdt, fee, is_short, caplog):
     caplog.set_level(logging.DEBUG)
     freqtrade = get_patched_freqtradebot(mocker, default_conf_usdt)
     mock_uts = mocker.patch('freqtrade.freqtradebot.FreqtradeBot.update_trade_state')
@@ -4716,7 +4671,7 @@ def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
     assert trade.open_order_id is None
     assert trade.stoploss_order_id is None
 
-    freqtrade.refind_lost_order(trade)
+    freqtrade.handle_insufficient_funds(trade)
     order = mock_order_1(is_short=is_short)
     assert log_has_re(r"Order Order(.*order_id=" + order['id'] + ".*) is no longer open.", caplog)
     assert mock_fo.call_count == 0
@@ -4734,13 +4689,13 @@ def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
     assert trade.open_order_id is None
     assert trade.stoploss_order_id is None
 
-    freqtrade.refind_lost_order(trade)
+    freqtrade.handle_insufficient_funds(trade)
     order = mock_order_4(is_short=is_short)
     assert log_has_re(r"Trying to refind Order\(.*", caplog)
-    assert mock_fo.call_count == 0
-    assert mock_uts.call_count == 0
-    # No change to orderid - as update_trade_state is mocked
-    assert trade.open_order_id is None
+    assert mock_fo.call_count == 1
+    assert mock_uts.call_count == 1
+    # Found open buy order
+    assert trade.open_order_id is not None
     assert trade.stoploss_order_id is None
 
     caplog.clear()
@@ -4752,11 +4707,11 @@ def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
     assert trade.open_order_id is None
     assert trade.stoploss_order_id is None
 
-    freqtrade.refind_lost_order(trade)
+    freqtrade.handle_insufficient_funds(trade)
     order = mock_order_5_stoploss(is_short=is_short)
     assert log_has_re(r"Trying to refind Order\(.*", caplog)
     assert mock_fo.call_count == 1
-    assert mock_uts.call_count == 1
+    assert mock_uts.call_count == 2
     # stoploss_order_id is "refound" and added to the trade
     assert trade.open_order_id is None
     assert trade.stoploss_order_id is not None
@@ -4771,7 +4726,7 @@ def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
     assert trade.open_order_id is None
     assert trade.stoploss_order_id is None
 
-    freqtrade.refind_lost_order(trade)
+    freqtrade.handle_insufficient_funds(trade)
     order = mock_order_6_sell(is_short=is_short)
     assert log_has_re(r"Trying to refind Order\(.*", caplog)
     assert mock_fo.call_count == 1
@@ -4787,7 +4742,7 @@ def test_refind_lost_order(mocker, default_conf_usdt, fee, caplog, is_short):
                            side_effect=ExchangeError())
     order = mock_order_5_stoploss(is_short=is_short)
 
-    freqtrade.refind_lost_order(trades[4])
+    freqtrade.handle_insufficient_funds(trades[4])
     assert log_has(f"Error updating {order['id']}.", caplog)
 
 

tests/test_misc.py

@@ -21,16 +21,19 @@ def test_decimals_per_coin():
 
 def test_round_coin_value():
     assert round_coin_value(222.222222, 'USDT') == '222.222 USDT'
-    assert round_coin_value(222.2, 'USDT') == '222.200 USDT'
+    assert round_coin_value(222.2, 'USDT', keep_trailing_zeros=True) == '222.200 USDT'
+    assert round_coin_value(222.2, 'USDT') == '222.2 USDT'
     assert round_coin_value(222.12745, 'EUR') == '222.127 EUR'
     assert round_coin_value(0.1274512123, 'BTC') == '0.12745121 BTC'
     assert round_coin_value(0.1274512123, 'ETH') == '0.12745 ETH'
 
     assert round_coin_value(222.222222, 'USDT', False) == '222.222'
-    assert round_coin_value(222.2, 'USDT', False) == '222.200'
+    assert round_coin_value(222.2, 'USDT', False) == '222.2'
+    assert round_coin_value(222.00, 'USDT', False) == '222'
     assert round_coin_value(222.12745, 'EUR', False) == '222.127'
     assert round_coin_value(0.1274512123, 'BTC', False) == '0.12745121'
     assert round_coin_value(0.1274512123, 'ETH', False) == '0.12745'
+    assert round_coin_value(222.2, 'USDT', False, True) == '222.200'
 
 
 def test_shorten_date() -> None:

tests/test_persistence.py

@@ -38,13 +38,17 @@ def test_init_custom_db_url(default_conf, tmpdir):
 
     init_db(default_conf['db_url'], default_conf['dry_run'])
     assert Path(filename).is_file()
+    r = Trade._session.execute(text("PRAGMA journal_mode"))
+    assert r.first() == ('wal',)
 
 
-def test_init_invalid_db_url(default_conf):
+def test_init_invalid_db_url():
     # Update path to a value other than default, but still in-memory
-    default_conf.update({'db_url': 'unknown:///some.url'})
     with pytest.raises(OperationalException, match=r'.*no valid database URL*'):
-        init_db(default_conf['db_url'], default_conf['dry_run'])
+        init_db('unknown:///some.url', True)
+
+    with pytest.raises(OperationalException, match=r'Bad db-url.*For in-memory database, pl.*'):
+        init_db('sqlite:///', True)
 
 
 def test_init_prod_db(default_conf, mocker):
@@ -2080,11 +2084,14 @@ def test_select_order(fee, is_short):
     order = trades[4].select_order(trades[4].enter_side, False)
     assert order is not None
 
+    trades[4].orders[1].ft_order_side = trades[4].exit_side
     order = trades[4].select_order(trades[4].exit_side, True)
     assert order is not None
+
+    trades[4].orders[1].ft_order_side = 'stoploss'
+    order = trades[4].select_order('stoploss', None)
+    assert order is not None
     assert order.ft_order_side == 'stoploss'
-    order = trades[4].select_order(trades[4].exit_side, False)
-    assert order is None
 
 
 def test_Trade_object_idem():